According to the applicable rules and regulations, I declare under my own responsibilities to be a dentist and therefore I am authorized to read the contents of this web site.
Libraries for the following systems are available free of charge:
- 3Shape System
- Dental Wings System
- Exocad System
- Amann Girrbach (Exocad)
- Haereus (OPEN 3Shape only)
- 3M (Dental Wings Open System only)
- Sinergia (Exocad)
- Straumann (Dental Wings Open System only)
- ZFX (Exocad)
- EGS System (Exocad)
- EGS System (DentalCad)
- Renishaw (Exocad)
The scanner suggested by Sweden & Martina is an open system based on structured light 3D acquisition technology, guaranteeing the complete digitalization of models in only a few minutes, including any marginal areas, and it can also communicate with other software applications with an STL format.
The Sweden & Martina milling center is the perfect accessory for Echo to obtain final products of industrial quality, guaranteeing the same precision of prosthetic components and the use of certified materials.
The center incorporates advanced technology that allow it to acquire files from other platforms as well, and to create prosthetic components on natural teeth and structures that are mixed and compatible with the main implant connections.
In addition to the legally required warranty, Sweden & Martina will replace any components verified as being defective for a total of five years.
The Scancenter service makes Echo technology available to users without a scanner.
This service needs no investments to be made, because the models complete with wax-ups are simply sent to the milling center, where Sweden & Martini personnel carry out the scanning and modeling, then sending the laboratory the finished component.
Caps and bridge structures are available in the following materials:
- Zirconia (white, ivory and cream)
- Milled cobalt-chrome
- Sintered cobalt-chrome
- Biomedical resin for temporary prostheses
- PMMA
- Fiberglass
Echo posts offer maximum connection precision, because they are made with the same micrometric tolerances as standard Sweden & Martina posts. Follow the workflow for an individual screw-retained prosthesis, and Echo will guide you step by step, from the acquisition of the model and implant positions through to anatomical modeling. Experiment with the automatic parallelization of posts, create a non-rotational element or personalize the chamfer on an abutment and display the screw hole and tightening dimensions, and see how these functions can make your work truly faster and easier, with aesthetic results that are the same as or even better than those that so far you could achieve with conventional laboratory techniques.
You’ll be able to fully appreciate all the advantages of the Echo system when working on screw-retained structures.
The Echo system already contains a library of connections, and it creates these with the same micrometric tolerances as commercially available prosthetic components, allowing you to produce structures with high standards of quality, with greater precision and passivation. Mixed structures resting on PADs and on implants with an external hexagon can also be produced, with the insertion of additional retentive elements and the possibility of virtually testing a variety of options and to assess them with a check on immediate feasibility, protecting you against errors and wasted time.
Available in the following materials:
- Zirconia
- Milled cobalt-chrome
- Milled bio-titanium
- PMMA
- Fiberglass
With the new design module dedicated entirely to bars you can intuitively create your structure with or without importing the wax-up, with the possibility of inserting additional retentive elements where your experience tells you they’ll be needed. The many years of collaboration between Sweden & Martina and Cendres+Metaux has made it possible to create a library of bars compatible with this famous Swiss company, allowing you to satisfy requests for both Dolder and Ackermann bars.
Screw-retained bar structures on Sweden & Martina implants are available in the following materials:
– Milled cobalt-chrome
– Milled bio-titanium
Some products may not be regulatory cleared/released for sale in all markets. Please contact the local Sweden & Martina or distributor sales office for current products availability.
Baldi D., Colombo J., Pera P., Hauschild U.
Numeri Uno, 2014;18: 6-9
Calesini G., Zarone F., Sorrentino R., Micarelli C., Fabianelli A., Papacchini F., Gherlone E.
Journal of Craniofacial Surgery 2014;25:822-827
The importance of precision in taking impressions for correct prosthesis preparation is well known. The authors performed comparative...
Canullo L., Coelho P.G., Bonfante E.A.
Journal of Applied Oral Sciences, accepted on 2012, December, 20th
This study analysed the fracture conditions of individual zirconia abutments produced with intentionally thin walls, designed to create...
Biscaro L., Becattelli A., Soattin M.
NumeriUno, 8, 04-05, 2009
In this clinical case, the single-model technique allowed rehabilitating the patient with one surgery and a minimal number of sessions for...
IMPLANTOLOGY - CLINICAL CASES
García Mira B., Viña Almunia J., Chust López C.
IMPLANTOLOGY - IMMEDIATE LOADING
Buda M., Motroni A., Aguzzi M.
CAD-CAM - CLINICAL CASES
Corrente G., Villa A., Greppi M., Perelli M., Abundo R.
IMPLANTOLOGY - IMPLANT PROSTHODONTICS
Paniz G.
